How to Mount a Scope to a Ruger 10/22: 7 Easy Steps


The 10/22 is an absolute blast to take to the vary for goal shooting. But you already know what’s much more enjoyable than that?

Taking a 10/22 with a scope to the vary.

A scope provides an entire new layer of enjoyable to focus on shooting as a result of it actually drives residence the need for accuracy.

In case you’re a new Ruger 10/22 proprietor or have been eager about including a scope to your rifle, we’ve put collectively a easy walk-through for putting in a scope.

Always just remember to take the time to correctly research scopes and the bottom to make sure that it’s going to work together with your firearm.

This mission requires minimal instruments and actually doesn’t take that much time to finish. And when you find yourself achieved you should have an awesome, enjoyable, new accent that I doubt you’ll ever get uninterested in.

Attaching a Scope Base Adapter to Ruger 10/22

The following steps are just about proper out of the Ruger 10/22 owner’s manual. Before doing any work on a firearm, at all times level it in a protected course and be sure that it’s absolutely unloaded.

Step 1

Pull again on the bolt deal with and lock the bolt open by pushing the security to the on place.

Step 2

Use a screwdriver to take away the 4 screws from the highest of the receiver. The screws will most probably be extraordinarily tight, so make sure to use an appropriately sized driver in order that the parts isn’t stripped.

Step 3

Place the adapter onto the receiver and change the screws with out tightening them.

Step 4

Begin tightening the screws by beginning with the primary one however solely flip it partway, now transfer onto the following one. Repeat this step till all 4 screws have a torque setting of 12-15 inch/lb.

Step 5

Release the bolt deal with and retract it a number of occasions. During this step enable the bolt to snap ahead by itself. This will point out whether or not the screws are hindering the motion of the bolt. If the bolt maneuvers easily then the screws are fantastic.

However, if the bolt is sluggish or appears to be getting caught on one thing, then the size of the screws could should be adjusted.

Step 6

Once the adapter is securely in place and the bolt is working correctly, a scope base and scope will be connected.

Use the directions that got here with the scope and the bottom to put in them correctly onto the adapter.

Step 7

Once the scope is put in, take it to the vary and 0 it in!


Wrap Up

I hope that this fast tutorial on the right way to set up a scope on a Ruger 10/22 was each informative and useful.

Remember, when you get your scop put in and zeroed in, take care to not bump the firearm or scope round an excessive amount of. This may change any changes that you just made.

Thanks for studying and have enjoyable together with your Ruger 10/22 and its new scope!

What sort of scope do you want to make use of with a Ruger 10/22? Sound off within the remark part under and tell us!



Source link

Leave a Reply

Your email address will not be published. Required fields are marked *

five × three =